Model | RG-AP630(CD) |
Target Deployments | For big campus, wireless city, harbor, storage room, mine |
Basic Specifications | |
Radio | Concurrent dual-radio dual-band |
Protocol | 802.11a/b/g/n/ac |
Operating Bands | 802.11b/g/n: 2.4GHz to 2.483GHz 802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries) |
Antenna | Built-in directional antenna |
Antenna Gain | 10dBi |
Max Throughput | 300Mbps@2.4G 867Mbps@5G 1.167Gbps per AP |
Spatial Streams | 2 |
IP Rating | IP67 |
Ports | |
Service Port | 1 10/100/1000Mbps ETH1/PoE IN port (RJ-45 connector); 1 SFP port (combo with ETH1) |
Power | |
Power Supply | PoE (802.3af) Compatible with POE+ |
Power Consumption | <12.95W |
WLAN | |
Maximum clients per AP | Up to 512 |
SSID capacity | Up to 14 per radio Up to 28 per AP |
SSID hiding | Support |
X-speed | Support |
STA control | SSID/radio-based |
Bandwidth control | STA/SSID/AP-based speed control |
Preference for 5GHz (band select) | Support |
Wireless position tracking | Support |
Dynamic Frequency Selection(DFS) | Future Release Support |
Security | |
PSK, Web, and 802.1x authentication | Support |
Data encryption | WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
QR code authentication | Support |
SMS authentication | Support |
PEAP authentication | Support |
Support Data frame filtering | Whitelist, static/dynamic blacklist |
User isolation | Support |
Rogue AP detection and countermeasure | Support |
Dynamic ACL assignment | Support |
WAPI | Support |
RADIUS | Support |
CPU Protection Policy (CPP) | Support |
Routing | |
IPv4 address | Static IP address or DHCP reservation |
IPv6 CAPWAP tunnel | Support |
ICMPv6 | Support |
IPv6 address | Manual or automatic configuration |
Multicast | Multicast to unicast conversion |
Management and Maintenance | |
Network management | SNMP v1/v2C/v3, Telnet, SSH, TFTP, and FTP and web management |
Visualized wireless heat map analysis | Support (need to integrate with SNC) |
Real-time spectrum analysis | Support (need to integrate with SNC) |
Fault detection and alarm | Support |
Cloud AC management | Support |
Statistics and logs | Support |
FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
External Characteristics | |
Lock | Support |
LED Indicators | Power status and WDS signal strength |
Dimensions (W x D x H) | 276 × 246 × 90 mm |
Weight | <2.5kg |